Redutor de tubo – Concêntrico e Excêntrico
Abter company carries a wide range of concentric and eccentric reducers.
Dimensional tolerances conform to ASME B16.9. Fitting wall thicknesses conform with standard schedule SCH10，SCH20，SCH30，DST,SCH40，SCH60，SCH80，SCH100，SCH120，SCH160 and ASME B36.19M wall pipe.
Butt welding fittings are permanently marked by electro-chemical etching in accordance with ASME B16.9. Estimated fitting weights are based on a density of .163 lbs/cubic inch.
A steel pipe reducer is the component in a pipeline that decreases the pipe size to a smaller bore. There are two main types of reducer: concentric and eccentric reducer. Some pipe reducers are manufactured by means of punch forming and others by bending, extruding, pushing, molding or machining.
The steel pipe reducer is used when liquid flow increases or decreases in small quantities. In order to prevent cavitation, it is also used to connect to the inlet hole of pump. Besides, it is also useful to connect joints in instrument like flow meter and control valve. The steel reducer also finds applications in sugar mills and distilleries, Bombas, petroquímico, cement and construction industries and steel plants. It can be stored in fumigation-free boxes or wooden holders.
Matérias-primas
* A234 – WPB WP5, WP9, WP11, WP22
* A420 – WPL3/ WPL6
* A403 – WP304/L; WP316/L
* A860-WPHY 42-46/52-60/65-70
Special Materials such as Monel, Inconel, Cu-Ni, Duplex SS etc are available on request
Specifications of the Steel Pipe Reducer
| Tipo | |||
| Seamless Reducer | Weld Reducer | Butt Welding Reducer | |
| Diâmetro externo | 1/2″ ~ 24″ | 4″ ~ 24″ | 12″ ~ 78″ |
| Espessura da Parede | 3 mm～ 150 milímetros | ||
| Tipo de produto | Concentric reducer, eccentric reducer | ||
Standard Available
Our company provides steel pipe reducers of different standards to meet requirements of customers.
GB/T12459-2005 GB/T13401-2005 GB/T10752-2005
SH/T3408-1996 SH/T3409-1996
SY/T0518-2002 SY/T0510-1998
DL/T695-1999 GD2000 GD87-1101
HG/T21635-1987 HG/T21631-1990
ASME B16.9-2007 ASME B16.25-2007
MSS SP 75-2008
CSA Z245.11-05-2005
EN10253-1-1999 EN10253-2-2007 EN10253-3-2008 EN10253-4-2008
DIN2605-1-1992 DIN2605-2-1995
BS1640-1-1962 BS1640-2-1962 BS1640-3-1968 BS1640-4-1968 BS1965-1-1963
AFNOR NF A 49-289-1990 AFNOR NF A 49-170-1-1999 AFNOR NF A 49-170-2-2009 AFNOR NF A 49-170-3-2009 AFNOR NF A 49-170-4-2009
ISO3419-1981 ISO5251-1981
JIS B2311-2009 JIS B2312-2009 JIS B2313-2009
buttweld-Reducer
| Diâmetro Nominal | Diâmetro externo | End to End | ||
| D1*D2 | ||||
| DN | NPS | Series A | Serices B | H |
| 20×15 | 3/4×1/2 | 26.9×21.3 | 25×18 | 38 |
| 20×10 | 3/4×3/8 | 26.9×17.3 | 25×14 | 38 |
| 25×20 | 1×3/4 | 33.7×26.9 | 32×25 | 51 |
| 25×15 | 1×1/2 | 33.7×21.3 | 32×18 | 51 |
| 32×25 | 1.1/4×1 | 42.4×33.7 | 38×32 | 51 |
| 32×20 | 1.1/4×3/4 | 42.4×26.9 | 38×25 | 51 |
| 32×15 | 1.1/4×1/2 | 42.4×21.3 | 38×18 | 51 |
| 40×32 | 1.1/2×1.1/4 | 48.3×42.4 | 45×38 | 64 |
| 40×25 | 1.1/2×1 | 48.3×33.7 | 45×32 | 64 |
| 40×20 | 1.1/2×3/4 | 48.3×26.9 | 45×25 | 64 |
| 40×15 | 1.1/2×1/2 | 48.3×21.3 | 45×18 | 64 |
| 50×40 | 2×1.1/2 | 60.3×48.3 | 57×45 | 76 |
| 50×32 | 2×1.1/4 | 60.3×42.4 | 57×38 | 76 |
| 50×25 | 2×1 | 60.3×33.7 | 57×32 | 76 |
| 50×20 | 2×3/4 | 60.3×26.9 | 57×25 | 76 |
| 65×50 | 2.1/2×2 | 73.0×60.3 | 76×57 | 89 |
| 65×40 | 2.1/2×1.1/2 | 73.0×48.3 | 76×45 | 89 |
| 65×32 | 2.1/2×1.1/4 | 73.0×42.4 | 76×38 | 89 |
| 65×25 | 2.1/2×1 | 73.0×33.7 | 76×32 | 89 |
| 80×65 | 3×2.1/2 | 88.9×73.0 | 89×76 | 89 |
| 80×50 | 3×2 | 88.9×60.3 | 89×57 | 89 |
| 80×40 | 3×1.1/2 | 88.9×48.3 | 89×45 | 89 |
| 80×32 | 3×1.1/4 | 88.9×42.4 | 89×38 | 89 |
| 90×80 | 3.1/2×3 | 101.6×88.9 | – | 102 |
| 90×65 | 3.1/2×2.1/2 | 101.6×73.0 | – | 102 |
| 90×50 | 3.1/2×2 | 101.6×60.3 | – | 102 |
| 90×40 | 3.1/2×1.1/2 | 101.6×48.3 | – | 102 |
| 90×32 | 3.1/2×1.1/4 | 101.6×42.4 | – | 102 |
| 100×90 | 4×3.1/2 | 114.3×101.6 | – | 102 |
| 100×80 | 4×3 | 114.3×88.9 | 108×89 | 102 |
| 100×65 | 4×2.1/2 | 114.3×73.0 | 108×76 | 102 |
| 100×50 | 4×2 | 114.3×60.3 | 108×57 | 102 |
| 100×40 | 4×1.1/2 | 114.3×48.3 | 108×45 | 102 |
| 125×100 | 5×4 | 141.3×114.3 | 133×108 | 127 |
| 125×90 | 5×3.1/2 | 141.3×101.6 | – | 127 |
| 125×80 | 5×3 | 141.3×88.9 | 133×89 | 127 |
| 125×65 | 5×2.1/2 | 141.3×73.0 | 133×76 | 127 |
| 125×50 | 5×2 | 141.3×60.3 | 133×57 | 127 |
| 150×125 | 6×5 | 168.3×141.3 | 159×133 | 140 |
| 150×100 | 6×5 | 168.3×114.3 | 159×108 | 140 |
| 150×90 | 6×3.1/2 | 168.3×101.6 | – | 140 |
| 150×80 | 6×3 | 168.3×88.9 | 159×89 | 140 |
| 150×65 | 6×2.1/2 | 168.3×73.0 | 159×76 | 140 |
| 200×150 | 8×6 | 219.1×168.3 | 219×159 | 152 |
| 200×125 | 8×5 | 219.1×141.3 | 219×133 | 152 |
| 200×100 | 8×4 | 219.1×114.3 | 219×108 | 152 |
| 200×90 | 8×3.1/2 | 219.1×101.6 | – | 152 |
| 250×200 | 10×8 | 273.0×219.1 | 273×219 | 178 |
| 250×150 | 10×6 | 273.0×168.3 | 273×159 | 178 |
| 250×125 | 10×5 | 273.0×141.3 | 273×133 | 178 |
| 250×100 | 10×4 | 273.0×114.3 | 273×108 | 178 |
| 300×250 | 12×10 | 323.9×273.1 | 325×273 | 203 |
| 300×200 | 12×8 | 323.9×219.1 | 325×219 | 203 |
| 300×150 | 12×6 | 323.9×168.3 | 325×159 | 203 |
| 300×125 | 12×5 | 323.9×141.3 | 325×133 | 203 |
| 350×300 | 14×12 | 355.6×323.9 | 377×325 | 330 |
| 350×250 | 14×10 | 355.6×273.0 | 377×273 | 330 |
| 350×200 | 14×8 | 355.6×219.1 | 377×219 | 330 |
| 350×150 | 14×6 | 355.6×168.3 | 377×159 | 330 |
| 400×350 | 16×14 | 406.4×355.6 | 426×377 | 356 |
| 400×300 | 16×12 | 406.4×323.9 | 426×325 | 356 |
| 400×250 | 16×10 | 406.4×273.0 | 426×273 | 356 |
| 400×200 | 16×8 | 406.4×219.1 | 426×219 | 356 |
| 450×400 | 18×16 | 457×406.4 | 478×426 | 381 |
| 450×350 | 18×14 | 457×355.6 | 478×377 | 381 |
| 450×300 | 18×12 | 457×323.9 | 478×325 | 381 |
| 450×250 | 18×10 | 457×273.0 | 478×273 | 381 |
| 500×450 | 20×18 | 508×457 | 529×478 | 508 |
| 500×400 | 20×16 | 508×406.4 | 529×426 | 508 |
| 500×350 | 20×14 | 508×355.6 | 529×377 | 508 |
| 500×300 | 20×12 | 508×323.9 | 529×325 | 508 |
| 550×500 | 22×20 | 559×508 | – | 508 |
| 550×450 | 22×18 | 559×457 | – | 508 |
| 550×400 | 22×16 | 559×406.4 | – | 508 |
| 550×350 | 22×14 | 559×355.6 | – | 508 |
| 600×550 | 24×22 | 610×559 | – | 508 |
| 600×500 | 24×20 | 610×508 | 630×529 | 508 |
| 600×450 | 24×18 | 610×457 | 630×478 | 508 |
| 600×400 | 24×22 | 610×406.4 | 630×426 | 508 |
| 650×600 | 26×24 | 660×610 | – | 610 |
| 650×550 | 26×22 | 660×559 | – | 610 |
| 650×500 | 26×20 | 660×508 | – | 610 |
| 650×450 | 26×18 | 660×457 | – | 610 |
| 700×650 | 28×26 | 711×660 | – | 610 |
| 700×600 | 28×24 | 711×610 | 720×630 | 610 |
| 700×550 | 28×22 | 711×559 | – | 610 |
| 700×500 | 28×20 | 711×508 | 720×530 | 610 |
| 750×700 | 30×28 | 762×711 | – | 610 |
| 750×650 | 30×26 | 762×660 | – | 610 |
| 750×600 | 30×24 | 762×610 | – | 610 |
| 750×550 | 30×22 | 762×559 | – | 610 |
| 800×750 | 32×30 | 813×762 | – | 610 |
| 800×700 | 32×28 | 813×711 | 820×720 | 610 |
| 800×650 | 32×26 | 813×660 | – | 610 |
| 800×600 | 32×24 | 813×610 | 820×630 | 610 |
| 850×800 | 34×32 | 864×813 | – | 610 |
| 850×750 | 34×30 | 864×762 | – | 610 |
| 850×700 | 34×28 | 864×711 | – | 610 |
| 850×650 | 34×26 | 864×660 | – | 610 |
| 900×850 | 36×34 | 914×864 | – | 610 |
| 900×800 | 36×32 | 914×813 | 920×820 | 610 |
| 900×750 | 36×30 | 914×762 | – | 610 |
| 900×700 | 36×28 | 914×711 | 920×720 | 610 |
| 950×900 | 38×36 | 965×914 | – | 610 |
| 950×850 | 38×34 | 965×864 | – | 610 |
| 950×800 | 38×32 | 965×813 | – | 610 |
| 950×750 | 38×30 | 965×762 | – | 610 |
| 1000×950 | 40×38 | 1016×965 | – | 610 |
| 1000×900 | 40×36 | 1016×914 | 1020×920 | 610 |
| 1000×850 | 40×34 | 1016×864 | – | 610 |
| 1000×800 | 40×32 | 1016×813 | 1020×820 | 610 |
| 1050×1000 | 42×40 | 1067×1016 | – | 610 |
| 1050×950 | 42×38 | 1067×965 | – | 610 |
| 1050×900 | 42×36 | 1067×914 | – | 610 |
| 1050×850 | 42×34 | 1067×864 | – | 610 |
| 1100×1050 | 44×42 | 1118×1067 | – | 610 |
| 1100×1000 | 44×40 | 1118×1016 | 1120×1020 | 610 |
| 1100×950 | 44×38 | 1118×965 | – | 610 |
| 1100×900 | 44×36 | 1118×914 | 1220×920 | 610 |
| 1150×1100 | 46×44 | 1168×1118 | – | 711 |
| 1150×1050 | 46×42 | 1168×1067 | – | 711 |
| 1150×1000 | 46×40 | 1168×1016 | – | 711 |
| 1150×950 | 46×38 | 1168×965 | – | 711 |
| 1200×1150 | 48×46 | 1220×1168 | – | 711 |
| 1200×1100 | 48×44 | 1220×1118 | 1220×1120 | 711 |
| 1200×1050 | 48×42 | 1220×1067 | – | 711 |
| 1200×1000 | 48×40 | 1220×1016 | 1220×1020 | 711 |
What’s the difference between CONCENTRIC REDUCER e ECCENTRIC REDUCER ?
CONCENTRIC REDUCER
The open ends of a concentric reducer are aligned and centered one to the other. Geralmente, this type of pipe reducer is used to modify the bore size of the pipeline by two (maximum three) measures, to avoid an excessive pressure drop in the pipeline.
If a larger reduction is needed, then a sequence of reducers shall be used to have a smooth and gradual adjustment of the pipeline bore size (vs. a drastic change).
For small bore size reductions, reducing flanges may be an alternative to buttweld reducers.
ECCENTRIC REDUCERThe open ends of an eccentric reducer are in an “offset” position one to the other.
Eccentric reducers are used, generally, for pipelines installed in a horizontal position (whereas concentric reducers are used for pipelines installed vertically or for the inlets of suction pumps, as top flat eccentric reducers).
PIPE REDUCERS MANUFACTURING PROCESS
CONCENTRIC VS ECCENTRIC REDUCER
The key difference between concentric vs eccentric reducer is the centricity of the inlet vs. the outlet of the fitting, which is perfect for a concentric reducer and offset of an eccentric reducer.
BW REDUCER MANUFACTURING PROCESS
Cold forming is the most common manufacturing process for seamless eccentric/concentric reducers (welded reducers are produced with the single or double seam weld process):
Os acessórios para tubos são usados em sistemas de encanamento para conectar seções retas de canos ou tubos, para acomodar diferentes tamanhos ou formas, e para outros fins, como regular (ou medindo) fluxo de fluido. Esses acessórios são usados em sistemas de encanamento para controlar a transferência de água, resíduos de gás ou líquidos em tubulações ou sistemas de encanamento em ambientes domésticos ou comerciais. Acessórios (tipos especialmente incomuns) exigir dinheiro, tempo, materiais e ferramentas para instalar e são uma parte importante dos sistemas de encanamento e encanamento. Acessórios para tubos comuns incluem principalmente: flange, cotovelos, acoplamentos, sindicatos, carretéis, redutores, buchas, camisetas, camisetas desviadoras, cruzes, bonés, plugues, farpas e válvulas. Embora as válvulas sejam tecnicamente adequadas, eles geralmente são discutidos separadamente.
Os corpos das conexões para tubos geralmente são feitos do mesmo material de base do tubo ou tubulação aos quais estão conectados.: cobre, aço, PVC, CPVC ou ABS. Qualquer material permitido pelo encanamento, códigos de saúde ou de construção (conforme aplicável) pode ser usado, mas deve ser compatível com os outros materiais do sistema, o fluido sendo transportado, e a temperatura e pressão dentro (e fora) o sistema. Acessórios de latão ou bronze sobre cobre Comum em sistemas de encanamento e encanamento. Resistência ao fogo, resistência ao choque, resistência mecânica, anti-roubo e outros fatores também afetam a escolha do material para acessórios para tubos.
Material Aço Inoxidável ASME / ASTM SA / A403 SA / UM 774 WP-S, WP-W, WP-WX, 304, 304eu, 316, 316eu, 304/304eu, 316/316eu, DE 1.4301, DIN1.4306, DE 1.4401, DE 1.4404 Dimensão ANSI B16.9, ANSI B16.28, MSS-SP-43 Tipo A, MSS-SP-43 Tipo B, ELE B2312, Cronograma 5S de Espessura JIS B2313, 10S, 20S, S10, S20, S30, DST, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS e etc..
Acessórios transversais permitem a ramificação de tubos, permitindo a distribuição de água ou outros fluidos para vários equipamentos ou áreas. Eles são comumente usados em sistemas de abastecimento de água, sistemas de irrigação, e sistemas de aquecimento.
Tampa de solda de topo Somos fabricantes de tampas de solda de topo e fornecemos todos os cronogramas em tipos de materiais como aço carbono, aço inoxidável, liga de aço. Zizi produz tampas para tubos na ASME, DE, JIS e outros padrões exigidos. A tampa do tubo é um dos acessórios de tubo comumente usados para parar o fluido, cobrindo a extremidade do tubo. Está disponível no tipo de solda de topo, tipo de solda de soquete e tipo roscado, e a tampa buttweld é mais popular devido ao bom desempenho, conexão estável e ampla faixa de seleção de dimensões.
